Dependence of substrate temperature of Zn0.8Co0.2O films deposited by pulsed DC magnetron sputtering

We have investigated the microstructure, electrical and magnetic properties of the ZnCoO thin films, which were prepared by the asymmetrical bipolar-pulsed DC magnetron sputtering as a function of substrate temperature. The structural properties of ZnCoO films were characterized with a high resolution XRD. The XRD patterns of the ZnCoO films showed a strong (0 0 2) preferential orientation. The average crystallite size was 23–35 nm, which was estimated from full width at half maximum of XRD results. The electrical resistivity of the films were measured by the van der Pauw method through Hall measurement and showed below 10⁻¹ Ω cm above 300 °C. The magnetic properties of the ZnCoO films were analyzed by the alternating gradient magnetometer at room temperature. All of the films were exhibited the ferromagnetic nature. The high conductivity and room temperature ferromagnetism of the ZnCoO films above 300 °C suggested that the possibility for the application to diluted magnetic semiconductors.     

Thin Film Counterelectrodes with High Li Charge Capacity for Electrochromic Windows

Summary.  Ce-V mixed oxide films have been deposited by RF sputtering with the aim of increasing the Li charge capacity of counter electrodes in smart windows. Such mixed oxides have shown high transmittance and optical passivity in the visible region. After electrode pre-conditioning by cyclic voltammetry, a good electrochemical reversibility in LiClO₄– propylene carbonate electrolyte was observed, and large Li-charge capacity under galvanostatic charging (up to 50 mCċcm⁻²) has been measured. The electrode charge capacity decreased after prolonged insertion-deinsertion cycles, whereas the photoptic transmittance remained about constant. After 800 cycles the Li-charge capacity decreased to 40 mCċcm⁻². The Li diffusion coefficient inside the films measured by electrochemical impedance and by galvanostatic titration ranged from 10⁻¹¹ cm²ċs⁻¹ to 10⁻¹³cm²ċs⁻¹. We observed that the Li charge capacity of the film electrodes is a function of the film deposition conditions, because it increased with the vanadium oxide concentration in the target and with the oxygen content in the sputtering atmosphere. Received June 23, 2000. Accepted (revised) August 7, 2000     

Fabrication of uniform porous alumina materials by radio frequency (RF) magnetron sputtering

Fabrication of porous materials with uniform pore size distribution remains a challenge. In this paper, a kind of uniform porous alumina material was fabricated on a template of polystyrene microspheres by radio frequency (RF) magnetron sputtering. Surface of samples was observed by scanning electron microscopy (SEM), and the phase of porous materials was confirmed by X-ray diffraction (XRD). The pore size distribution of samples was tested by mercury intrusion method.     

BEPCII新加速管的高功率测试和老练

BEPCⅡ(北京正负电子对撞机重大改进工程)要求其直线注入器提供更高的能量和流强,为此必须改进正电子产生靶前后的加速管,以提高加速梯度,并消除原有加速管因长期运行后性能有所下降的隐患.本文叙述了新加速管的高功率测试,包括测试装置的设计、建立,微波功率源(速调管)的调试和加速管高功率测试结果及其分析.     

用于短波长FEL的光阴极微波电子枪设计研究

高增益、短波长自由电子激光器需要发射度低、峰值电流高的短脉冲电子束流.采用发射度补偿技术,设计了一台S波段、一个半腔体的光阴极微波电子枪以用于建议中的SDUV-FEL装置.POISSON,SUPERFISH和PARMELA程序的计算表明:当微脉冲电量为2nC时,这种设计能产生ε_n,rms=2.3π·mm·mrad、E_k=4.8MeV的电子束流.报道了该枪的设计考虑和模拟结果.     

高频感应等离子体流动模型与微型电推进器流场特性分析

微型射频离子推力器具有结构简单、工作寿命长、推力动态范围大、性能调节响应灵敏等特点,是国际微电推进领域的研究热点之一.射频离子推力器电离室内的感性耦合放电等离子体特性和推力器的性能密切相关.为此,文章建立了低气压、小尺寸微型射频离子推力器电离室内感性耦合等离子体流体模型,开展了电磁场、流场、化学反应浓度场的多物理场耦合仿真分析,并研究了等离子体放电特征参数随推进剂工质气压、放电吸收功率、射频频率以及线圈匝数等因素的变化规律.结果表明,推进剂工质气压、放电吸收功率是调节微型射频离子推力器性能的主要因素,该研究为综合调控微型射频离子推力器的工作性能奠定了良好的基础.      

Effects of post-annealing on crystalline and transport properties of Bi_2Te_3 thin films

A well-established method is highly desirable for growing topological insulator thin films with low carrier density on a wafer-level scale. Here, we present a simple, scalable method based on magnetron sputtering to obtain high-quality Bi_2 Te_3 films with the carrier density down to 4.0 × 10~(13) cm~(-2). In contrast to the most-used method of high substrate temperature growth, we firstly sputtered Bi_2 Te_3 thin films at room temperature and then applied post-annealing. It enables the growth of highly-oriented Bi_2 Te_3 thin films with larger grain size and smoother interface. The results of electrical transport show that it has a lower carrier density as well as a larger coherent length(～ 228 nm, 2 K). Our studies pave the way toward large-scale, cost-effective production of Bi_2 Te_3 thin films to be integrated with other materials in wafer-level scale for electronic and spintronic applications.     

Band offsets and electronic properties of the Ga2O3/FTO heterojunction via transfer of free-standing Ga2O3 onto FTO/glass

The determination of band offsets is crucial in the optimization of Ga₂O₃-based devices, since the band alignment types could determine the operations of devices due to the restriction of carrier transport across the heterogeneous interfaces. In this work, the band offsets of the Ga₂O₃/FTO heterojunction are studied using x-ray photoelectron spectroscopy (XPS) based on Kraut's method, which suggests a staggered type-Ⅱ alignment with a conduction band offset (ΔE_C) of 1.66 eV and a valence band offset (ΔE_V) of -2.41 eV. Furthermore, the electronic properties of the Ga₂O₃/FTO heterostructure are also measured, both in the dark and under ultraviolet (UV) illuminated conditions (254 nm UV light). Overall, this work can provide meaningful guidance for the design and construction of oxide hetero-structured devices based on wide-bandgap semiconducting Ga₂O₃.     

Microstructure of nickel nanoparticles embedded in carbon films: case study on annealing effect by micromorphology analysis

The presented study is aimed at analyzing the surface texture of amorphous hydrogenated carbon layers containing nickel nanoparticles (Ni‐NPs@a‐C:H) within their structure, which were deposited by Radio Frequency (RF) sputtering and RF‐Plasma Enhanced Chemical Vapor Deposition (RF‐PECVD) methods on glass substrates. Prepared films were then used as research material following their annealing at two different temperatures of 250 °C and 350 °C in an inert argon atmosphere. Series of height samples were taken with the help of atomic force microscopy (AFM) operating in a non‐contact mode and examined in order to determine their fractal characteristics. Raw AFM data were first plane‐fitted to remove the surface bow exhibiting the so‐called residual surface, and then numerically processed to calculate the Areal Autocorrelation Function (AACF), which was later used to compute the Structure Function (SF). The log–log plots of the latter served for calculation of fractal properties of surfaces under investigation, including fractal dimension D, and pseudo‐topothesy K. The analysis of 3‐D surface texture helps to understand their essential characteristics and their implications as well as graphical models and their implementation in computer simulation. Copyright © 2016 John Wiley & Sons, Ltd.     

Application of thiophilic chromatography to deplete serum immunoglobulins in sample preparation for bidimensional electrophoresis

Serum is a typical sample for non-invasive studies in clinical research. Its proteome characterization is challenging, since requires extensive protein depletion. Methods used nowadays for removal of high-abundance proteins are expensive or show quite often a low loading capacity, which has strong repercussions on the number of samples and replicates per analysis.In order to deplete immunoglobulins (Igs) and albumin (HSA) from 1 mL serum samples, we have developed a protocol based on a combination of thiophilic chromatography, not previously used in clinical proteomics, and a HSA-specific resin. Ig/HSA-depleted samples, immunoglobulinome and albuminone were analyzed by 2-DE. Thiophilic chromatography, coupled with HSA-depletion, allows a good 2-DE resolution as well as the visualization of new spots. Moreover, it yields enough protein to evaluate technical variability and facilitate subsequent protein identification. To validate the protocol, we carried out a preliminary comparative study between triplicate Igs/HSA-depleted serum samples from healthy control individuals and recently diagnosed/untreated rheumatoid arthritis (RA) patients. RA patients showed several acute phase proteins, as well as additional serum proteins, differentially and significantly regulated.Therefore, thiophilic chromatography can be used as an efficient and economical method in 2-DE to deplete immunoglobulins from large human serum samples before a more extensive fractioning.